Chapter 2. Fast Start: Cure for Impatience

John H. Terpstra

Samba Team

Table of Contents

Features and Benefits
Description of Example Sites
Worked Examples
Stand-alone Server
Domain Member Server
Domain Controller

When we first asked for suggestions for inclusion in the Samba HOWTO documentation, someone wrote asking for example configurations and lots of them. That is remarkably difficult to do, without losing a lot of value that can be derived from presenting many extracts from working systems. That is what the rest of this document does. It does so with extensive descriptions of the configuration possibilities within the context of the chapter that covers it. We hope that this chapter is the medicine that has been requested.

The information in this chapter is very sparse compared with the book “Samba-3 by Example” that was written after the original version of this book was nearly complete. Samba-3 by Example was the result of feedback from reviewers during the final copy editing of the first edition. It was interesting to see that reader feedback mirrored that given be the original reviewers. In any case, a month and a half was spent in doing basic research to better understand what new as well as experienced network administrators would best benefit from. The book Samba-3 by Example is the result of that research. What is presented in the few pages of this book is covered far more comprehensively in the second edition of Samba-3 by Example. The second edition of both books will be released at the same time.

So in summary, the book “The Official Samba-3 HOWTO & Reference Guide” is intended as the equivalent of a auto mechanics' repair guide. The book “Samba-3 by Example” is the equivalent of the drivers guide that explains how to drive the car. If you want complete network configuration examples go to “Samba-3 by Example”.

Features and Benefits

Samba needs very little configuration to create a basic working system. In this chapter we progress from the simple to the complex, for each providing all steps and configuration file changes needed to make each work. Please note that a comprehensively configured system will likely employ additional smart features. These additional features are covered in the remainder of this document.

The examples used here have been obtained from a number of people who made requests for example configurations. All identities have been obscured to protect the guilty and any resemblance to unreal non-existent sites is deliberate.

Description of Example Sites

In the first set of configuration examples we consider the case of exceptionally simple system requirements. There is a real temptation to make something that should require little effort much too complex.

??? documents the type of server that might be sufficient to serve CD-ROM images, or reference document files for network client use. This configuration is also discussed in ???, ???. The purpose for this configuration is to provide a shared volume that is read-only that anyone, even guests, can access.

The second example shows a minimal configuration for a print server that anyone can print to as long as they have the correct printer drivers installed on their computer. This is a mirror of the system described in ???, ???.

The next example is of a secure office file and print server that will be accessible only to users who have an account on the system. This server is meant to closely resemble a Workgroup file and print server, but has to be more secure than an anonymous access machine. This type of system will typically suit the needs of a small office. The server provides no network logon facilities, offers no Domain Control; instead it is just a network attached storage (NAS) device and a print server.

Finally, we start looking at more complex systems that will either integrate into existing Microsoft Windows networks, or replace them entirely. The examples provided cover domain member servers as well as Samba Domain Control (PDC/BDC) and finally describes in detail a large distributed network with branch offices in remote locations.

Worked Examples

The configuration examples are designed to cover everything necessary to get Samba running. They do not cover basic operating system platform configuration, which is clearly beyond the scope of this text.

It is also assumed that Samba has been correctly installed, either by way of installation of the packages that are provided by the operating system vendor, or through other means.

Stand-alone Server

A Stand-alone Server implies no more than the fact that it is not a Domain Controller and it does not participate in Domain Control. It can be a simple workgroup-like server, or it may be a complex server that is a member of a domain security context.

Anonymous Read-Only Document Server

The purpose of this type of server is to make available to any user any documents or files that are placed on the shared resource. The shared resource could be a CD-ROM drive, a CD-ROM image, or a file storage area.

As the examples are developed, every attempt is made to progress the system toward greater capability, just as one might expect would happen in a real business office as that office grows in size and its needs change.

The configuration file is:

Example 2.1. Anonymous Read-Only Server Configuration

# Global parameters
[global]
workgroup = MIDEARTH
netbios name = HOBBIT
security = share
[data]
comment = Data
path = /export
read only = Yes
guest ok = Yes

  • The file system share point will be /export.

  • All files will be owned by a user called Jack Baumbach. Jack's login name will be jackb. His password will be m0r3pa1n of course, that's just the example we are using; do not use this in a production environment because all readers of this document will know it.

Procedure 2.1. Installation Procedure Read-Only Server

  1. Add user to system (with creation of the users' home directory):

    root# useradd -c "Jack Baumbach" -m -g users -p m0r3pa1n jackb
    

  2. Create directory, and set permissions and ownership:

    root# mkdir /export
    root# chmod u+rwx,g+rx,o+rx /export
    root# chown jackb.users /export
    

  3. Copy the files that should be shared to the /export directory.

  4. Install the Samba configuration file (/etc/samba/smb.conf) as shown.

  5. Test the configuration file:

    root# testparm
    

    Note any error messages that might be produced. Proceed only if error-free output has been obtained. An example of the output with the following file will list the file.

    Load smb config files from /etc/samba/smb.conf
    Processing section "[data]"
    Loaded services file OK.
    Server role: ROLE_STANDALONE
    Press enter to see a dump of your service definitions
    [Press enter]
    
    # Global parameters
    [global]
    	workgroup = MIDEARTH
    	netbios name = HOBBIT
    	security = share
    
    [data]
    	comment = Data
    	path = /export
    	read only = Yes
    	guest only = Yes
    

  6. Start Samba using the method applicable to your operating system platform.

  7. Configure your Microsoft Windows client for workgroup MIDEARTH, set the machine name to ROBBINS, reboot, wait a few (2 - 5) minutes, then open Windows Explorer and visit the network neighborhood. The machine HOBBIT should be visible. When you click this machine icon, it should open up to reveal the data share. After clicking the share it, should open up to reveal the files previously placed in the /export directory.

The information above (following # Global parameters) provides the complete contents of the /etc/samba/smb.conf file.

Anonymous Read-Write Document Server

We should view this configuration as a progression from the previous example. The difference is that shared access is now forced to the user identity of jackb and to the primary group jackb belongs to. One other refinement we can make is to add the user jackb to the smbpasswd file. To do this execute:

root# smbpasswd -a jackb
New SMB password: m0r3pa1n
Retype new SMB password: m0r3pa1n
Added user jackb.

Addition of this user to the smbpasswd file allows all files to be displayed in the Explorer Properties boxes as belonging to jackb instead of to User Unknown.

The complete, modified smb.conf file is as shown in ???.

Example 2.2. Modified Anonymous Read-Write smb.conf

# Global parameters
[global]
workgroup = MIDEARTH
netbios name = HOBBIT
security = SHARE
[data]
comment = Data
path = /export
force user = jackb
force group = users
read only = No
guest ok = Yes

Anonymous Print Server

An anonymous print server serves two purposes:

  • It allows printing to all printers from a single location.

  • It reduces network traffic congestion due to many users trying to access a limited number of printers.

In the simplest of anonymous print servers, it is common to require the installation of the correct printer drivers on the Windows workstation. In this case the print server will be designed to just pass print jobs through to the spooler, and the spooler should be configured to do raw pass-through to the printer. In other words, the print spooler should not filter or process the data stream being passed to the printer.

In this configuration it is undesirable to present the Add Printer Wizard and we do not want to have automatic driver download, so we will disable it in the following configuration. ??? is the resulting smb.conf file.

Example 2.3. Anonymous Print Server smb.conf

# Global parameters
[global]
workgroup = MIDEARTH
netbios name = LUTHIEN
security = share
printcap name = cups
disable spoolss = Yes
show add printer wizard = No
printing = cups
[printers]
comment = All Printers
path = /var/spool/samba
guest ok = Yes
printable = Yes
use client driver = Yes
browseable = No

The above configuration is not ideal. It uses no smart features, and it deliberately presents a less than elegant solution. But it is basic, and it does print.

Note

Windows users will need to install a local printer and then change the print to device after installation of the drivers. The print to device can then be set to the network printer on this machine.

Make sure that the directory /var/spool/samba is capable of being used as intended. The following steps must be taken to achieve this:

  • The directory must be owned by the superuser (root) user and group:

    root# chown root.root /var/spool/samba
    

  • Directory permissions should be set for public read-write with the sticky-bit set as shown:

    root# chmod a+trw TX /var/spool/samba
    

    The purpose of setting the sticky bit is to prevent who does not own the temporary print file from being able to take control of it with the potential for devious mis-use.

Note

On CUPS enabled systems there is a facility to pass raw data directly to the printer without intermediate processing via CUPS print filters. Where use of this mode of operation is desired it is necessary to configure a raw printing device. It is also necessary to enable the raw mime handler in the /etc/mime.conv and /etc/mime.types files. Refer to ???.

Secure Read-Write File and Print Server

We progress now from simple systems to a server that is slightly more complex.

Our new server will require a public data storage area in which only authenticated users (i.e., those with a local account) can store files, as well as a home directory. There will be one printer that should be available for everyone to use.

In this hypothetical environment (no espionage was conducted to obtain this data), the site is demanding a simple environment that is secure enough but not too difficult to use.

Site users will be: Jack Baumbach, Mary Orville and Amed Sehkah. Each will have a password (not shown in further examples). Mary will be the printer administrator and will own all files in the public share.

This configuration will be based on User Level Security that is the default, and for which the default is to store Microsoft Windows-compatible encrypted passwords in a file called /etc/samba/smbpasswd. The default smb.conf entry that makes this happen is: passdb backend = smbpasswd, guest. Since this is the default it is not necessary to enter it into the configuration file. Note that guest backend is added to the list of active passdb backends not matter was it specified directly in Samba configuration file or not.

Procedure 2.2. Installing the Secure Office Server

  1. Add all users to the Operating System:

    root# useradd -c "Jack Baumbach" -m -g users -p m0r3pa1n jackb
    root# useradd -c "Mary Orville" -m -g users -p secret maryo
    root# useradd -c "Amed Sehkah" -m -g users -p secret ameds
    

  2. Configure the Samba smb.conf file as shown in ???.

    Example 2.4. Secure Office Server smb.conf

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = OLORIN
    printcap name = cups
    disable spoolss = Yes
    show add printer wizard = No
    printing = cups
    [homes]
    comment = Home Directories
    valid users = %S
    read only = No
    browseable = No
    [public]
    comment = Data
    path = /export
    force user = maryo
    force group = users
    guest ok = Yes
    read only = No
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root, maryo
    create mask = 0600
    guest ok = Yes
    printable = Yes
    use client driver = Yes
    browseable = No

  3. Initialize the Microsoft Windows password database with the new users:

    root# smbpasswd -a root
    New SMB password: bigsecret
    Reenter smb password: bigsecret
    Added user root.
    
    root# smbpasswd -a jackb
    New SMB password: m0r3pa1n
    Retype new SMB password: m0r3pa1n
    Added user jackb.
    
    root# smbpasswd -a maryo
    New SMB password: secret
    Reenter smb password: secret
    Added user maryo.
    
    root# smbpasswd -a ameds
    New SMB password: mysecret
    Reenter smb password: mysecret
    Added user ameds.
    

  4. Install printer using the CUPS Web interface. Make certain that all printers that will be shared with Microsoft Windows clients are installed as raw printing devices.

  5. Start Samba using the operating system administrative interface. Alternately, this can be done manually by executing:

    root#  nmbd; smbd;
    

    Both applications automatically will execute as daemons. Those who are paranoid about maintaining control can add the -D flag to coerce them to start up in daemon mode.

  6. Configure the /export directory:

    root# mkdir /export
    root# chown maryo.users /export
    root# chmod u=rwx,g=rwx,o-rwx /export
    

  7. Check that Samba is running correctly:

    root# smbclient -L localhost -U%
    Domain=[MIDEARTH] OS=[UNIX] Server=[Samba-3.0.20]
    
    Sharename      Type      Comment
    ---------      ----      -------
    public         Disk      Data
    IPC$           IPC       IPC Service (Samba-3.0.20)
    ADMIN$         IPC       IPC Service (Samba-3.0.20)
    hplj4          Printer   hplj4
    
    Server               Comment
    ---------            -------
    OLORIN               Samba-3.0.20
    
    Workgroup            Master
    ---------            -------
    MIDEARTH             OLORIN
    

  8. Connect to OLORIN as maryo:

    root# smbclient //olorin/maryo -Umaryo%secret
    OS=[UNIX] Server=[Samba-3.0.20]
    smb: \> dir
    .                              D        0  Sat Jun 21 10:58:16 2003
    ..                             D        0  Sat Jun 21 10:54:32 2003
    Documents                      D        0  Fri Apr 25 13:23:58 2003
    DOCWORK                        D        0  Sat Jun 14 15:40:34 2003
    OpenOffice.org                 D        0  Fri Apr 25 13:55:16 2003
    .bashrc                        H     1286  Fri Apr 25 13:23:58 2003
    .netscape6                    DH        0  Fri Apr 25 13:55:13 2003
    .mozilla                      DH        0  Wed Mar  5 11:50:50 2003
    .kermrc                        H      164  Fri Apr 25 13:23:58 2003
    .acrobat                      DH        0  Fri Apr 25 15:41:02 2003
    
    		55817 blocks of size 524288. 34725 blocks available
    smb: \> q
    

By now you should be getting the hang of configuration basics. Clearly, it is time to explore slightly more complex examples. For the remainder of this chapter we will abbreviate instructions since there are previous examples.

Domain Member Server

In this instance we will consider the simplest server configuration we can get away with to make an accounting department happy. Let's be warned, the users are accountants and they do have some nasty demands. There is a budget for only one server for this department.

The network is managed by an internal Information Services Group (ISG), to which we belong. Internal politics are typical of a medium-sized organization; Human Resources is of the opinion that they run the ISG because they are always adding and disabling users. Also, departmental managers have to fight tooth and nail to gain basic network resources access for their staff. Accounting is different though, they get exactly what they want. So this should set the scene.

We will use the users from the last example. The accounting department has a general printer that all departmental users may. There is also a check printer that may be used only by the person who has authority to print checks. The Chief Financial Officer (CFO) wants that printer to be completely restricted and for it to be located in the private storage area in her office. It therefore must be a network printer.

Accounting department uses an accounting application called SpytFull that must be run from a central application server. The software is licensed to run only off one server, there are no workstation components, and it is run off a mapped share. The data store is in a UNIX-based SQL backend. The UNIX gurus look after that, so is not our problem.

The accounting department manager (maryo) wants a general filing system as well as a separate file storage area for form letters (nastygrams). The form letter area should be read-only to all accounting staff except the manager. The general filing system has to have a structured layout with a general area for all staff to store general documents, as well as a separate file area for each member of her team that is private to that person, but she wants full access to all areas. Users must have a private home share for personal work-related files and for materials not related to departmental operations.

Example Configuration

The server valinor will be a member server of the company domain. Accounting will have only a local server. User accounts will be on the Domain Controllers as will desktop profiles and all network policy files.

  1. Do not add users to the UNIX/Linux server; all of this will run off the central domain.

  2. Configure smb.conf according to ??? and ???.

    Example 2.5. Member server smb.conf (globals)

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = VALINOR
    security = DOMAIN
    printcap name = cups
    disable spoolss = Yes
    show add printer wizard = No
    idmap uid = 15000-20000
    idmap gid = 15000-20000
    winbind use default domain = Yes
    printing = cups

    Example 2.6. Member server smb.conf (shares and services)

    [homes]
    comment = Home Directories
    valid users = %S
    read only = No
    browseable = No
    [spytfull]
    comment = Accounting Application Only
    path = /export/spytfull
    valid users = @Accounts
    admin users = maryo
    read only = Yes
    [public]
    comment = Data
    path = /export/public
    read only = No
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root, maryo
    create mask = 0600
    guest ok = Yes
    printable = Yes
    use client driver = Yes
    browseable = No

  3. Join the domain. Note: Do not start Samba until this step has been completed!

    root# net rpc join -Uroot%'bigsecret'
    Joined domain MIDEARTH.
    

  4. Make absolutely certain that you disable (shut down) the nscd daemon on any system on which winbind is configured to run.

  5. Start Samba following the normal method for your operating system platform. If you wish to this manually execute as root:

    root# nmbd; smbd; winbindd;
    

  6. Configure the name service switch control file on your system to resolve user and group names via winbind. Edit the following lines in /etc/nsswitch.conf:

    passwd: files winbind
    group:  files winbind
    hosts:  files dns winbind
    

  7. Set the password for wbinfo to use:

    root# wbinfo --set-auth-user=root%'bigsecret'
    

  8. Validate that domain user and group credentials can be correctly resolved by executing:

    root# wbinfo -u
    MIDEARTH\maryo
    MIDEARTH\jackb
    MIDEARTH\ameds
    ...
    MIDEARTH\root
    
    root# wbinfo -g
    MIDEARTH\Domain Users
    MIDEARTH\Domain Admins
    MIDEARTH\Domain Guests
    ...
    MIDEARTH\Accounts
    

  9. Check that winbind is working. The following demonstrates correct username resolution via the getent system utility:

    root# getent passwd maryo
    maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false
    

  10. A final test that we have this under control might be reassuring:

    root# touch /export/a_file
    root# chown maryo /export/a_file
    root# ls -al /export/a_file
    ...
    -rw-r--r--    1 maryo    users       11234 Jun 21 15:32 a_file
    ...
    
    root# rm /export/a_file
    

  11. Configuration is now mostly complete, so this is an opportune time to configure the directory structure for this site:

    root# mkdir -p /export/{spytfull,public}
    root# chmod ug=rwxS,o=x /export/{spytfull,public}
    root# chown maryo.Accounts /export/{spytfull,public}
    

Domain Controller

For the remainder of this chapter the focus is on the configuration of Domain Control. The examples that follow are for two implementation strategies. Remember, our objective is to create a simple but working solution. The remainder of this book should help to highlight opportunity for greater functionality and the complexity that goes with it.

A Domain Controller configuration can be achieved with a simple configuration using the new tdbsam password backend. This type of configuration is good for small offices, but has limited scalability (cannot be replicated) and performance can be expected to fall as the size and complexity of the domain increases.

The use of tdbsam is best limited to sites that do not need more than a primary Domain Controller (PDC). As the size of a domain grows the need for additional Domain Controllers becomes apparent. Do not attempt to under-resource a Microsoft Windows network environment; Domain Controllers provide essential authentication services. The following are symptoms of an under-resourced Domain Control environment:

  • Domain logons intermittently fail.

  • File access on a Domain Member server intermittently fails, giving a permission denied error message.

A more scalable Domain Control authentication backend option might use Microsoft Active Directory, or an LDAP-based backend. Samba-3 provides for both options as a Domain Member server. As a PDC Samba-3 is not able to provide an exact alternative to the functionality that is available with Active Directory. Samba-3 can provide a scalable LDAP-based PDC/BDC solution.

The tdbsam authentication backend provides no facility to replicate the contents of the database, except by external means. (i.e., there is no self-contained protocol in Samba-3 for Security Account Manager database [SAM] replication.)

Note

If you need more than one Domain Controller, do not use a tdbsam authentication backend.

Example: Engineering Office

The engineering office network server we present here is designed to demonstrate use of the new tdbsam password backend. The tdbsam facility is new to Samba-3. It is designed to provide many user and machine account controls that are possible with Microsoft Windows NT4. It is safe to use this in smaller networks.

  1. A working PDC configuration using the tdbsam password backend can be found in ??? together with ???:

    Example 2.7. Engineering Office smb.conf (globals)

    [global]
    workgroup = MIDEARTH
    netbios name = FRODO
    passdb backend = tdbsam
    printcap name = cups
    add user script = /usr/sbin/useradd -m %u
    delete user script = /usr/sbin/userdel -r %u
    add group script = /usr/sbin/groupadd %g
    delete group script = /usr/sbin/groupdel %g
    add user to group script = /usr/sbin/groupmod -A %u %g
    delete user from group script = /usr/sbin/groupmod -R %u %g
    add machine script = /usr/sbin/useradd -s /bin/false -d /var/lib/nobody %u
    # Note: The following specifies the default logon script.
    # Per user logon scripts can be specified in the user account using pdbedit
    logon script = scripts\logon.bat
    # This sets the default profile path. Set per user paths with pdbedit
    logon path = \\%L\Profiles\%U
    logon drive = H:
    logon home = \\%L\%U
    domain logons = Yes
    os level = 35
    preferred master = Yes
    domain master = Yes
    idmap uid = 15000-20000
    idmap gid = 15000-20000
    printing = cups

    Example 2.8. Engineering Office smb.conf (shares and services)

    [homes]
    comment = Home Directories
    valid users = %S
    read only = No
    browseable = No
    # Printing auto-share (makes printers available thru CUPS)
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root, maryo
    create mask = 0600
    guest ok = Yes
    printable = Yes
    browseable = No
    [print$]
    comment = Printer Drivers Share
    path = /var/lib/samba/drivers
    write list = maryo, root
    printer admin = maryo, root
    # Needed to support domain logons
    [netlogon]
    comment = Network Logon Service
    path = /var/lib/samba/netlogon
    admin users = root, maryo
    guest ok = Yes
    browseable = No
    # For profiles to work, create a user directory under the path
    # shown. i.e., mkdir -p /var/lib/samba/profiles/maryo
    [Profiles]
    comment = Roaming Profile Share
    path = /var/lib/samba/profiles
    read only = No
    profile acls = Yes
    # Other resource (share/printer) definitions would follow below.

  2. Create UNIX group accounts as needed using a suitable operating system tool:

    root# groupadd ntadmins
    root# groupadd designers
    root# groupadd engineers
    root# groupadd qateam
    

  3. Create user accounts on the system using the appropriate tool provided with the operating system. Make sure all user home directories are created also. Add users to groups as required for access control on files, directories, printers, and as required for use in the Samba environment.

  4. Assign each of the UNIX groups to NT groups: (It may be useful to copy this text to a shell script called initGroups.sh.) <title>Shell script for initializing group mappings</title>

    #!/bin/bash
    #### Keep this as a shell script for future re-use
    			
    # First assign well known groups
    net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmins
    net groupmap modify ntgroup="Domain Users"  unixgroup=users
    net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
    
    # Now for our added Domain Groups
    net groupmap add ntgroup="Designers" unixgroup=designers type=d
    net groupmap add ntgroup="Engineers" unixgroup=engineers type=d
    net groupmap add ntgroup="QA Team"   unixgroup=qateam    type=d
    

  5. Create the scripts directory for use in the [NETLOGON] share:

    root# mkdir -p /var/lib/samba/netlogon/scripts
    

    Place the logon scripts that will be used (batch or cmd scripts) in this directory.

The above configuration provides a functional Primary Domain Control (PDC) system to which must be added file shares and printers as required.

A Big Organization

In this section we finally get to review in brief a Samba-3 configuration that uses a Light Weight Directory Access (LDAP)-based authentication backend. The main reasons for this choice are to provide the ability to host primary and Backup Domain Control (BDC), as well as to enable a higher degree of scalability to meet the needs of a very distributed environment.

The Primary Domain Controller

This is an example of a minimal configuration to run a Samba-3 PDC using an LDAP authentication backend. It is assumed that the operating system has been correctly configured.

The Idealx scripts (or equivalent) are needed to manage LDAP based Posix and/or SambaSamAccounts. The Idealx scripts may be downloaded from the Idealx Web site. They may also be obtained from the Samba tarball. Linux distributions tend to install the Idealx scripts in the /usr/share/doc/packages/sambaXXXXXX/examples/LDAP/smbldap-tools directory. Idealx scripts version smbldap-tools-0.8.7 are known to work well.

  1. Obtain from the Samba sources ~/examples/LDAP/samba.schema and copy it to the /etc/openldap/schema/ directory.

  2. Set up the LDAP server. This example is suitable for OpenLDAP 2.1.x. The /etc/openldap/slapd.conf file: <title>Example slapd.conf file</title>

    # Note commented out lines have been removed
    include         /etc/openldap/schema/core.schema
    include         /etc/openldap/schema/cosine.schema
    include         /etc/openldap/schema/inetorgperson.schema
    include         /etc/openldap/schema/nis.schema
    include         /etc/openldap/schema/samba.schema
    
    pidfile         /var/run/slapd/slapd.pid
    argsfile        /var/run/slapd/slapd.args
    
    database        bdb
    suffix          "dc=quenya,dc=org"
    rootdn          "cn=Manager,dc=quenya,dc=org"
    rootpw          {SSHA}06qDkonA8hk6W6SSnRzWj0/pBcU3m0/P
    # The password for the above is 'nastyon3'
    
    directory     /var/lib/ldap
    
    index   objectClass     eq
    index cn                      pres,sub,eq
    index sn                      pres,sub,eq
    index uid                     pres,sub,eq
    index displayName             pres,sub,eq
    index uidNumber               eq
    index gidNumber               eq
    index memberUid               eq
    index   sambaSID              eq
    index   sambaPrimaryGroupSID  eq
    index   sambaDomainName       eq
    index   default               sub
    

  3. Create the following file samba-ldap-init.ldif:

    # Organization for SambaXP Demo
    dn: dc=quenya,dc=org
    objectclass: dcObject
    objectclass: organization
    dc: quenya
    o: SambaXP Demo
    description: The SambaXP Demo LDAP Tree
    
    # Organizational Role for Directory Management
    dn: cn=Manager,dc=quenya,dc=org
    objectclass: organizationalRole
    cn: Manager
    description: Directory Manager
    
    # Setting up the container for users
    dn: ou=People, dc=quenya, dc=org
    objectclass: top
    objectclass: organizationalUnit
    ou: People
    
    # Set up an admin handle for People OU
    dn: cn=admin, ou=People, dc=quenya, dc=org
    cn: admin
    objectclass: top
    objectclass: organizationalRole
    objectclass: simpleSecurityObject
    userPassword: {SSHA}0jBHgQ1vp4EDX2rEMMfIudvRMJoGwjVb
    # The password for above is 'mordonL8'
    

  4. Load the initial data above into the LDAP database:

    root# slapadd -v -l initdb.ldif
    

  5. Start the LDAP server using the appropriate tool or method for the operating system platform on which it is installed.

  6. Install the Idealx script files in the /usr/local/sbin directory, then configure the smbldap_conf.pm file to match your system configuration.

  7. The smb.conf file that drives this backend can be found in example ???.

    Example 2.9. LDAP backend smb.conf for PDC

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = FRODO
    passdb backend = ldapsam:ldap://localhost
    username map = /etc/samba/smbusers
    printcap name = cups
    add user script = /usr/local/sbin/smbldap-useradd -m '%u'
    delete user script = /usr/local/sbin/smbldap-userdel %u
    add group script = /usr/local/sbin/smbldap-groupadd -p '%g'
    delete group script = /usr/local/sbin/smbldap-groupdel '%g'
    add user to group script = /usr/local/sbin/smbldap-groupmod -m '%u' '%g'
    delete user from group script = /usr/local/sbin/smbldap-groupmod -x '%u' '%g'
    set primary group script = /usr/local/sbin/smbldap-usermod -g '%g' '%u'
    add machine script = /usr/local/sbin/smbldap-useradd -w '%u'
    logon script = scripts\logon.bat
    logon path = \\%L\Profiles\%U
    logon drive = H:
    logon home = \\%L\%U
    domain logons = Yes
    os level = 35
    preferred master = Yes
    domain master = Yes
    ldap suffix = dc=quenya,dc=org
    ldap machine suffix = ou=People
    ldap user suffix = ou=People
    ldap group suffix = ou=People
    ldap idmap suffix = ou=People
    ldap admin dn = cn=Manager
    ldap ssl = no
    ldap passwd sync = Yes
    idmap uid = 15000-20000
    idmap gid = 15000-20000
    printing = cups

  8. Add the LDAP password to the secrets.tdb file so Samba can update the LDAP database:

    root# smbpasswd -w mordonL8
    

  9. Add users and groups as required. Users and groups added using Samba tools will automatically be added to both the LDAP backend as well as to the operating system as required.

Backup Domain Controller

??? shows the example configuration for the BDC.

  1. Decide if the BDC should have its own LDAP server or not. If the BDC is to be the LDAP server change the following smb.conf as indicated. The default configuration in ??? uses a central LDAP server.

    Example 2.10. Remote LDAP BDC smb.conf

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    passdb backend = ldapsam:ldap://frodo.quenya.org
    username map = /etc/samba/smbusers
    printcap name = cups
    logon script = scripts\logon.bat
    logon path = \\%L\Profiles\%U
    logon drive = H:
    logon home = \\%L\%U
    domain logons = Yes
    os level = 33
    preferred master = Yes
    domain master = No
    ldap suffix = dc=quenya,dc=org
    ldap machine suffix = ou=People
    ldap user suffix = ou=People
    ldap group suffix = ou=People
    ldap idmap suffix = ou=People
    ldap admin dn = cn=Manager
    ldap ssl = no
    ldap passwd sync = Yes
    idmap uid = 15000-20000
    idmap gid = 15000-20000
    printing = cups

  2. Configure the NETLOGON and PROFILES directory as for the PDC in ???.