频道栏目
首页 > 资讯 > CCIE > 正文

CCIE EIGRP综合实验

11-07-26        来源:[db:作者]  
收藏   我要投稿

最近看一个老师讲EIGRP,留了一个综合实验,感觉很有意思,给大家分享一下:

实验需求:
1:R1,2,3,5运行EIGRP100,且关闭自动汇总;
2:指定route-id为环回口;
3:R1不能从环回口接收和发送任何EIGRP信息;
4:运行EIGRP100的路由器,HOP count超过10,路由信息将无效;
5:R1,2,3hello时间10S。Dead时间30S;
6:帧中继网络中使用认证,key-chain=killccie  key=10  password=killccie10;
7:当R2,3的以太网断掉,保证R2,3的环回口可以通信;
8:R1环回口down,发出query包,2分钟得不到回应就重置邻居关系;
9:R5,6串行链路封装PPP,CHAP认证,单播建立EIGRP 200邻居;
10:EIGRP关闭自动汇总,不可以出现32位路由;
11:R5在EIGRP200中只用bandwidth决定metric;
12:R6,5之间带宽修改为700K,EIGRP使用70K的带宽;
13:R5做EIGRP双向重分布;
14:R1的loopback14修改delay为100,要求R2,3看到一条汇总路由,验证metric为最小的 那个;
15:在R6环回口创建多地址,并通告进RIPV2;
16:在R5上看到DX的R6路由,R2,3只能看到D的路由;
17:R3启用环回口不通告进EIGRP100中,但要求全网能够访问,要求使用ip default-network;
18:在R6上,只允许R1的loopback100能telnetR6的6.6.6.6;
19:配置R6不接收任何EIGRP200的QUERY;
20:R6可以给EIGRP200的邻居发送直连,汇总,重分布的信息。
 
 
声明下我做的时候修改了EIGRP100为90,200为100,大家看下配置:
R1#show running-config
key chain killccie
 key 10
  key-string killccie10
interface Loopback10
 ip address 1.1.1.1 255.255.255.0
 delay 100
interface Loopback11
 ip address 1.3.1.1 255.255.255.0
interface Loopback12
 ip address 1.4.1.1 255.255.255.0
interface Loopback14
 ip address 1.2.1.1 255.255.255.0
interface Loopback100
 ip address 11.11.11.11 255.255.255.0
interface Serial1/2
 ip address 123.1.1.1 255.255.255.0
 ip hello-interval eigrp 90 10
 ip hold-time eigrp 90 30
 ip authentication mode eigrp 90 md5
 ip authentication key-chain eigrp 90 killccie
 encapsulation frame-relay
 ip summary-address eigrp 90 1.0.0.0 255.0.0.0 5
 serial restart-delay 0
router eigrp 90
 timers active-time 2
 passive-interface default
 no passive-interface Serial1/2
 network 1.1.1.1 0.0.0.0
 network 1.2.1.0 0.0.0.255
 network 1.3.1.1 0.0.0.0
 network 1.4.1.1 0.0.0.0
 network 11.11.11.11 0.0.0.0
 network 123.1.1.0 0.0.0.255
 metric maximum-hops 10
 no auto-summary
 eigrp router-id 1.1.1.1
R2#show running-config
key chain killccie
 key 10
  key-string killccie10
interface Loopback10
 ip address 2.2.2.2 255.255.255.0
interface FastEthernet0/0
 ip address 90.1.1.2 255.255.255.0
interface Serial1/2
 ip address 123.1.1.2 255.255.255.0
 ip hello-interval eigrp 90 10
 ip hold-time eigrp 90 30
 ip authentication mode eigrp 90 md5
 ip authentication key-chain eigrp 90 killccie
 encapsulation frame-relay
router eigrp 90
 network 2.0.0.0
 network 90.1.1.2 0.0.0.0
 network 123.1.1.0 0.0.0.255
 metric maximum-hops 10
 no auto-summary
 eigrp router-id 2.2.2.2
R3#show running-config
key chain killccie
 key 10
  key-string killccie10
interface Loopback10
 ip address 3.3.3.3 255.255.255.0
interface Loopback20
 ip address 33.33.33.33 255.255.255.0
interface FastEthernet0/0
 ip address 90.1.1.3 255.255.255.0
interface Serial1/2
 ip address 123.1.1.3 255.255.255.0
 ip hello-interval eigrp 90 10
 ip hold-time eigrp 90 30
 ip authentication mode eigrp 90 md5
 ip authentication key-chain eigrp 90 killccie
 encapsulation frame-relay
router eigrp 90
 network 3.0.0.0
 network 90.1.1.3 0.0.0.0
 network 123.1.1.0 0.0.0.255
 network 123.0.0.0
 network 0.0.0.0
 metric maximum-hops 10
 no auto-summary
 eigrp router-id 3.3.3.3
ip default-network 0.0.0.0
ip route 0.0.0.0 0.0.0.0 Loopback10
R5#show running-config
username R6 password 0 ccie
interface Loopback10
 ip address 5.5.5.5 255.255.255.0
interface FastEthernet0/0
 ip address 90.1.1.5 255.255.255.0
 ip summary-address eigrp 90 66.66.0.0 255.255.0.0 5
interface Serial1/1
 bandwidth 700
 ip address 56.1.1.5 255.255.255.0
 ip bandwidth-percent eigrp 100 10
 encapsulation ppp
 no peer neighbor-route
 serial restart-delay 0
 ppp authentication chap
 ppp chap hostname R5
 ppp chap password 0 ccie
router eigrp 90
 redistribute eigrp 100 metric 1544 20000 255 1 1500
 network 90.1.1.5 0.0.0.0
 no auto-summary
router eigrp 100
 redistribute eigrp 90 metric 1544 20000 255 1 1500
 network 5.5.5.5 0.0.0.0
 network 5.5.5.0 0.0.0.255
 network 56.1.1.5 0.0.0.0
 metric weights 0 1 0 0 0 0
 no auto-summary
R6#show running-config
enable secret 5 $1$K7fP$XVk0Ioiaw5bV.bFCoi62Y0
username R5 password 0 ccie
interface Loopback10
 ip address 6.6.6.6 255.255.255.0
interface Loopback11
 ip address 66.66.66.66 255.255.255.0
interface Loopback12
 ip address 66.66.77.66 255.255.255.0
interface Loopback13
 ip address 66.66.88.66 255.255.255.0
interface Loopback100
 ip address 60.60.60.60 255.255.255.0
interface Serial1/0
 bandwidth 700
 ip address 56.1.1.6 255.255.255.0
 ip access-group 100 in
 ip bandwidth-percent eigrp 100 10
 encapsulation ppp
 no peer neighbor-route
 serial restart-delay 0
 ppp authentication chap
 ppp chap hostname R6
 ppp chap password 0 ccie
router eigrp 100
 redistribute rip metric 1544 20000 255 1 1500
 network 6.6.6.6 0.0.0.0
 network 56.1.1.6 0.0.0.0
 network 60.60.60.60 0.0.0.0
 metric weights 0 1 0 0 0 0
 no auto-summary
 eigrp stub redistributed
router rip
 version 2
 network 66.0.0.0
 no auto-summary
access-list 100 permit tcp host 11.11.11.11 any eq telnet
access-list 100 deny   tcp any any eq telnet
access-list 100 permit ip any any
line vty 0 4
 password ccie
 Login
看下最后的路由表:
R6#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 56.1.1.5 to network 0.0.0.0
D EX 1.0.0.0/8 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     2.0.0.0/24 is subnetted, 1 subnets
D EX    2.2.2.0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     33.0.0.0/24 is subnetted, 1 subnets
D EX    33.33.33.0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     3.0.0.0/24 is subnetted, 1 subnets
D EX    3.3.3.0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     5.0.0.0/24 is subnetted, 1 subnets
D       5.5.5.0 [90/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     66.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
D EX    66.66.0.0/16 [170/3656960] via 56.1.1.5, 00:17:23, Serial1/0
C       66.66.66.0/24 is directly connected, Loopback11
C       66.66.77.0/24 is directly connected, Loopback12
C       66.66.88.0/24 is directly connected, Loopback13
     6.0.0.0/24 is subnetted, 1 subnets
C       6.6.6.0 is directly connected, Loopback10
     56.0.0.0/24 is subnetted, 1 subnets
C       56.1.1.0 is directly connected, Serial1/0
     11.0.0.0/24 is subnetted, 1 subnets
D EX    11.11.11.0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     123.0.0.0/24 is subnetted, 1 subnets
D EX    123.1.1.0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     90.0.0.0/24 is subnetted, 1 subnets
D EX    90.1.1.0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
     60.0.0.0/24 is subnetted, 1 subnets
C       60.60.60.0 is directly connected, Loopback100
D*EX 0.0.0.0/0 [170/3656960] via 56.1.1.5, 00:17:24, Serial1/0
R3#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
D    1.0.0.0/8 [90/2195456] via 123.1.1.1, 00:34:11, Serial1/2
     2.0.0.0/24 is subnetted, 1 subnets
D       2.2.2.0 [90/156160] via 90.1.1.2, 00:45:39, FastEthernet0/0
     33.0.0.0/24 is subnetted, 1 subnets
C       33.33.33.0 is directly connected, Loopback20
     3.0.0.0/24 is subnetted, 1 subnets
C       3.3.3.0 is directly connected, Loopback10
     5.0.0.0/24 is subnetted, 1 subnets
D EX    5.5.5.0 [170/6780416] via 90.1.1.5, 00:45:39, FastEthernet0/0
     66.0.0.0/16 is subnetted, 1 subnets
D       66.66.0.0 [90/6780416] via 90.1.1.5, 00:17:37, FastEthernet0/0
     56.0.0.0/24 is subnetted, 1 subnets
D EX    56.1.1.0 [170/6780416] via 90.1.1.5, 00:45:40, FastEthernet0/0
     11.0.0.0/24 is subnetted, 1 subnets
D       11.11.11.0 [90/2297856] via 123.1.1.1, 00:24:53, Serial1/2
     123.0.0.0/24 is subnetted, 1 subnets
C       123.1.1.0 is directly connected, Serial1/2
     90.0.0.0/24 is subnetted, 1 subnets
C       90.1.1.0 is directly connected, FastEthernet0/0
S*   0.0.0.0/0 is directly connected, Loopback10
 
总结一下,个人感觉该实验没什么特别难点,有几个重点还是需要注意一下的:
1:telnet源接口,这个用的应该会很多;
2:EIGRP中route-id的作用。
个人感觉这个主要是用来重分布之后做标记,可以防止环路。有待考究,呵呵。
本文出自 “没兴趣” 博客

相关TAG标签
上一篇:Cisco Switch 2960初始化配置
下一篇:CCIE OSPF综合实验
相关文章
图文推荐

关于我们 | 联系我们 | 广告服务 | 投资合作 | 版权申明 | 在线帮助 | 网站地图 | 作品发布 | Vip技术培训 | 举报中心

版权所有: 红黑联盟--致力于做实用的IT技术学习网站